Our universal profiles join many different types of floor coverings of different heights, for both residential and commercial applications. These stylish, multipurpose profiles, for finishing and edge protection, are available in a wide range of finishes which accentuate any flooring selection by creating harmony within the overall design.
Pre-fit edge trim profile for resilient floorings such as LVT, LVP and sheet vinyl, laminate, wood, ceramic, natural stone and carpet
Configure this profile
Pre-fit edge trim profile for resilient floorings such as LVT, LVP and sheet vinyl, laminate and wood
Configure this profile
Pre-fit edge trim profile for adhered or floating click-floorings, resilient such as LVT, LVP and sheet vinyl, laminate and wood
Configure this profile
Pre-fit edge trim for laminate and wood
Configure this profile
PROFILE SELECTION GUIDE
KO-Original profiles are the metal floor trim that joins floor coverings of different heights and protects the exposed edge. Start with the floor covering you are installing — the guide below shows which profiles are designed for it.
LVT, LVP and sheet vinyl
KO-A · KO-B · KO-C
Laminate
KO-A · KO-B · KO-C · KO-D
Wood flooring
KO-A · KO-B · KO-C · KO-D
Ceramic tile
KO-A
Natural stone
KO-A
Carpet
KO-A
Adhered / floating click-flooring
KO-C
The two terms are often used interchangeably, but they do different jobs. Floor molding covers the joint where the floor meets the wall. Floor trim — the category KO-Original belongs to — finishes and protects the exposed edge of the floor covering itself: where two floors of different heights meet, where a floor ends at a doorway, or where an edge would otherwise be left open. Because that edge takes the wear, KO profiles are made from aluminum and stainless steel rather than wood or MDF.
Every KO profile is a metal edge trim. Finishes include anodized aluminum in silver, sand, bronze and titanium, polished and brushed options, wood decors, and powder coating in almost any RAL color. The standard length is 2.50 meters (approximately 8' 2-1/2"). Installation depends on the profile and the subfloor: countersunk and screwed, self-adhesive, or with the anchoring leg embedded directly into the setting material.
